Get quality custom packaging solutions at wholesale prices
Boxes with hanging and locking tabs put your product on the peg hook and keep it closed until the customer is ready. A die-cut hang tab rises above the carton, while locking tabs hold the end flaps firmly through restocking and browsing. Buy custom printed boxes with hanging and locking tabs with your logo on every panel, including the hanger. We supply them wholesale in custom sizes with free design support, no die or plate charges and low minimums. Buy now or request a quote.
A box with hanging and locking tabs is a folding carton that combines a die-cut hang tab, punched for a peg hook or slot hook, with locking tabs that secure the closure. The hang panel is usually an extension of the back panel, doubled over for strength, and the locking tabs are small die-cut tongues that click into slits on the dust flaps or front panel so the box cannot fall open on the rack.
The result is a single-piece carton that works on a pegboard wall, a slatwall arm or a clip strip, and still stands on a shelf when you need it to. Custom boxes with hanging and locking tabs are a staple in hardware, beauty, electronics accessories and impulse aisles near checkout.
The locking tabs hold the box shut by hooking a small die-cut tongue into a matching slit, so the closure resists being pulled open by gravity or curious hands. Unlike a plain friction tuck, a locked flap stays seated even when the carton hangs at an angle on a crowded peg.
We choose the lock based on product weight and how often staff restock. Lighter items like lip balm or earbuds do well with a slit lock tuck, while tool accessories and phone cables usually need a tab-and-slot lock on top and a locking bottom below.
The hang tab is strong enough because it is usually two layers of board folded and glued together, which doubles the material around the punch. A single-thickness tab can tear when a shopper lifts the box off the hook; a doubled header spreads the load and keeps the hole round.
We also size the hole to the hardware your retailer uses. A round hole suits standard peg hooks, while the sombrero slot slides onto both pegs and flat slat hooks. If the product is heavy, we can shift the hole to sit directly above the center of gravity so the box hangs straight instead of tilting forward.
Hanging tab packaging suits small, lightweight to medium items that sell from peg walls, endcaps and checkout lanes. Typical products include:
SBS paperboard at 18 to 20 pt works best for most peg-hook cartons, because it balances print quality with enough stiffness to keep the hang tab flat. Lighter beauty items can drop to 16 pt, while heavier tools often step up to 24 pt or E-flute corrugated.
Kraft board is popular with natural and outdoor brands. It has a strong, fibrous feel, and bold one or two color designs read clearly against its brown surface. If you want shoppers to see the product, a die-cut window with clear window film keeps the box rigid while showing color, texture or size at a glance.
A window removes board, so placement matters on a box that hangs. We keep at least a generous margin of solid board between the window and every fold, and we never cut a window into the panel that carries the hang tab. If you want a large viewing area, a design based on our window boxes can be adapted with a doubled header and locks, so the product stays visible and the carton still hangs flat. For very heavy items, we may suggest a smaller window paired with a printed product photo instead.
Custom printed boxes with hanging and locking tabs let one package do two jobs: merchandising on the peg and protecting the product in the box. That makes them a practical choice for brands that sell through several retail channels at once.
Boxes with hanging and locking tabs with logo printing on the header also help shoppers find your brand on a crowded wall, since the top of the box is often the only part visible when several units hang on one hook. Ordering boxes with hanging and locking tabs wholesale keeps every SKU on the same structure, which makes a planogram look clean and organized.
Gloss lamination and spot UV help a hanging box stand out under bright store lighting, while matte or soft-touch lamination gives a calmer, premium feel for beauty and lifestyle products. Foil stamping on the logo draws the eye across a long aisle, and embossing adds a tactile detail customers notice when they lift the box off the hook.
Lamination also protects the surface. Hanging cartons get handled more than shelf cartons, so a laminated or aqueous-coated finish reduces scuffing and fingerprints during restocking and browsing.
Send artwork as PDF, AI or EPS at 300 DPI in CMYK. Remember to include barcodes and any retailer-required information so we can place them on the back panel.
If your product lives on a hook, the box needs to hang straight, stay shut and sell on its own. Tell us what you are packing and where it will be displayed, and we will recommend a lock style, board weight and finish to match. Buy boxes with hanging and locking tabs that arrive ready for the retail wall and keep your product secure until checkout.
Building out a full retail range? Brands often combine these cartons with our hanging tab boxes for lighter items, auto lock bottom boxes for heavier goods, and the wider selection in our retail packaging collection.
A basic hanging tab box has a die-cut hang panel but closes with a friction tuck. Adding locking tabs means the flaps hook into slits or slots, so the box stays closed while it hangs, swings or gets handled by shoppers.
A round hole fits standard peg hooks, while the sombrero or delta slot works on both pegs and flat slatwall hooks. If you are not sure what your retailers use, the sombrero slot is the most flexible choice for mixed store fixtures.
That depends on board grade and whether the tab is doubled. A double-thickness header in 18 to 24 pt paperboard handles most accessories, cosmetics and small tools. Share your product weight and we will recommend the right construction.
We position the hang hole above the product’s center of gravity, so the box hangs level rather than tipping forward. For items with uneven weight, an internal insert can hold the product in place and balance the carton.
Yes. The carton has a flat base, so it stands upright when a store prefers shelf placement. Some brands add a fold-back hang tab that tucks behind the box when it is not on a hook, keeping the top edge neat.
Yes. We can die-cut a window on the front panel and back it with clear window film. Shoppers see the color or size of the item while the locking tabs keep everything secure inside the carton.
Absolutely. The hang tab is printed front and back, which makes it a useful space for your logo, a short product name or a sale callout. It is often the most visible part of the box when several units share one hook.
Yes. They are die-cut, printed and glued on the manufacturing line, then shipped flat to save storage space. Your team folds the walls up, closes the bottom, packs the product and locks the top by hand.
Locking tabs make casual opening harder, and we can add a perforated tear strip that clearly shows if a box has been opened. This is helpful for cosmetics, supplements and electronics accessories sold from open peg walls.
Send PDF, AI or EPS files at 300 DPI in CMYK with fonts outlined. We provide a dieline showing every panel, the hang tab and the lock positions, so text and barcodes stay clear of folds and die cuts.
You receive a digital proof and a 3D mockup with every order, showing the hang tab, locks and artwork placement. Once you approve the proof, production begins, and any changes before approval are handled by our design team.
Yes, we offer low minimums so new products and test SKUs can launch without a large inventory commitment. Your quote lists several quantity options, which makes it easy to scale up when the item proves itself on the peg wall.
Lead time varies with quantity, board choice and finishes such as foil or window film. Your timeline is confirmed on your quote, and we will flag any detail that might affect delivery before you approve production.
Paperboard cartons are widely accepted in curbside paper recycling. Choosing kraft board, aqueous coating and a paperboard insert keeps the whole box fiber-based, which is an easy improvement over many blister and clamshell formats.
Yes, design support is free. Our team can create the full layout, adjust your existing artwork to the dieline, and make sure logos, barcodes and product details stay readable on the hang tab, front panel and sides.
